Nashik Railway Station to Shirdi Distance – Complete Travel Guide

The distance from Nashik Road Railway Station to Shirdi is approximately 83 to 86 km by road, depending on which route you take. The journey takes around 1 hour 41 minutes to 1 hour 55 minutes by car, depending on traffic conditions and toll preference.

There isn't just one fixed number here — Google Maps itself shows slightly different distances depending on live traffic and whether you choose the toll road or the toll-free road. Below is the real, route-wise breakdown so you know exactly what to expect.

Route-Wise Distance & Time Breakdown

Note: These figures are based on live Google Maps driving data for the Nashik Road Railway Station–Shirdi stretch. Actual time can vary by 10–15 minutes depending on the time of day, weekday vs weekend traffic, and weather.

Travel Time by Mode of Transport

For a comfortable, direct journey — especially with luggage after a train ride — a Nashik to Shirdi cab booking remains the fastest and most convenient option.

Why "Nashik Railway Station" Confuses First-Time Travellers

This is important, so pay attention here: Nashik actually has two different railway stations, and mixing them up can add 20–30 extra minutes to your trip.

1. Nashik Road Railway Station – This is the main railway station that most trains (including long-distance trains from Mumbai, Pune, and other cities) stop at. It is located about 8 km from Nashik city centre, closer to the Shirdi direction.
2. Nashik City – This refers to the central city area (Panchavati, CBS, College Road), not a railway station.

If your train ticket says "Nashik Road" (station code: NK), you are already on the Shirdi side of the city — which is actually a small advantage, since you don't need to cross through city traffic to start your journey toward Shirdi.

Best Route from Nashik Road Railway Station to Shirdi

The most commonly used route goes via Sinnar, connecting further toward Kopargaon before reaching Shirdi. This is the route most cab drivers and state transport buses use because:

• It has better road quality (NH-60 stretch) compared to smaller village roads
• It avoids unnecessary turns through congested market areas
• Fuel stops, dhabas, and washroom breaks are easily available along the way

If you prefer to skip the toll section, an alternate road adds roughly 10–15 minutes but costs nothing extra — useful if you're not in a rush.

How to Travel from Nashik Railway Station to Shirdi

1. Private Cab / Taxi (Most Recommended)

A direct, one-way or round-trip taxi is the easiest option right after a train journey — no waiting, no transfers, and door-to-door drop at your hotel or the Shirdi Sai Baba Temple gate. This is especially useful for:

• Families and senior citizens who don't want the hassle of switching vehicles
• Groups travelling together with luggage
• Anyone planning to visit Trimbakeshwar or Shani Shingnapur on the same trip

Check our Nashik to Shirdi Cab Service – Distance, Taxi Fare & Best Route Guide for current fare details.

2. State Transport (ST) Buses

Regular buses run from Nashik to Shirdi, but they usually start from the Nashik CBS bus stand, not the railway station — meaning you'll need a short local transfer first, adding to your total travel time.

3. Shared Cabs / Auto to Bus Stand

A budget option, but it involves an extra transfer and less predictable timing — not ideal if you're travelling with luggage or elderly family members.

Things to Keep in Mind While Planning

• Early morning departures (before 8 AM) usually have the smoothest traffic and shortest travel time.
• Weekends and festival days (especially Thursdays, which are considered auspicious for Sai Baba darshan) see heavier traffic near Shirdi town — plan for an extra 20–30 minutes.
• If you're combining Shirdi with a Trimbakeshwar Jyotirlinga visit, it's more time-efficient to do it as a single darshan tour rather than two separate trips. See our Trimbakeshwar Shirdi Darshan One Day Tour Package for a ready-made itinerary.